3 Common Reasons Why Your Double Glazing Lock Repairs Isn't Working (And Solutions To Resolve It)
3 Common Reasons Why Your Double Glazing Lock Repairs Isn't Working (And Solutions To Resolve It)
Blog Article
Double Glazing Lock Repairs
The use of high-quality locks on your windows and doors helps to prevent burglars from accessing your home. They don't usually like breaking glass or trying to squeeze through open windows.
However, some double glazing owners have experienced issues with their door lock or window lock after it's been installed. These issues can usually be solved without the need for new double glazing.
Broken or faulty locks
A locksmith can fix your uPVC window lock or door lock if it's broken or faulty. They can repair hinges, striker plates, and locks for your double glazing. They can also adjust the cylinder to fix any misalignment which could be causing your handle to operate correctly.
If the key fits inside the lock but it won't turn or is difficult to insert the mechanism could be stuck. This can be due to dirt or grime getting stuck inside the mechanism. If this is the situation it could be possible for the lock to be cleaned and lubricated. Make use of a dry lubricant, such as graphite or teflon and not oil, as oil attracts dirt and cause it to stick to the mechanism's inside. After lubricating the lock you must insert the key and attempt to turn it. The lubricant must be absorbed into the mechanism and the lock should be able to turn smoothly.
Screws that are loose within the lock mechanism are another reason for a broken lock. They can become loose and fall out or break off completely and stop the lock from functioning properly. A screwdriver can be used to tighten these screws however, care must be taken not to tighten them too much because this could cause damage to the internal components.
A broken lock can be hazardous for you and your family. This is particularly relevant if you have young children. They can easily unlock the door without your knowledge which gives them access to your house. If you're concerned that this could occur, a professional locksmith can help secure the double-glazed doors.
Misty Glaze is a professional uPVC company in Lancing that can repair all types faulty and damaged mechanisms on uPVC windows and doors. We can also reconfigure the locking mechanism on your uPVC windows or double glazing to meet your requirements. This means that replacement windows and doors are not always necessary.
Handles that are damaged or broken
A lot of double-glazed windows come with the multi-point lock as part of the overall security package. This is a great choice for those who are concerned about potential burglars trying to gain entry into their home. Ask your locksmith for antilift locks. They can be installed as an addition to the existing locks and can help keep your windows firmly shut.
It's not uncommon for the handle locks to become damaged or fail - they are the first part of your window that will be forced open by a criminal intent on breaking into. The good news is that this is among the easiest parts to repair.
Modern uPVC handles as well as aluminium handles come with the multi-point locking mechanism referred to as Espagnolette which is designed to prevent forced entry. This security upgrade is often available as an extra on new uPVC window installations. Older style uPVC and aluminium handles can be upgraded to lock bolts that shoot, again as an optional extra on new double glazed window installations.
When a handle is faulty it's important to get this repaired as soon as is possible. The damaged handles could stop the window from closing properly and permit drafts to enter. It could also be a weakness that burglars who are opportunistic might exploit, putting your belongings and family at risk of being stolen.
The process of fixing the malfunctioning mechanism begins by getting access to the frame of the window and removing the damaged handle. The gearbox is then opened to identify the type of gearbox that is used to open the handle. This will permit double glazed repairs near me to replace the handle that matches the profile and the internal window frame mechanisms.
After the mechanism is replaced, the handle may be reattached using the original screws. However, we suggest replacing them with larger screws since here they provide an even more secure fit. The final stage is to apply a layer of clear sealant to shield the handle from further rust. After that, your window will be operational again, and at less than the cost of replacing the entire window.
Hinges that are broken or faulty
If your windows do not close properly, draughts could be able double glazed windows near me to enter, your home's security measures will be compromised and there's an increased risk of water damage or damp. Broken or damaged window hinges are a typical problem that can be fixed easily.
If you have a window made of uPVC that isn't able to open or close it's likely that the hinges are broken or damaged and require replacement. Most window companies will require you to purchase a new window unit to address this issue, but we can replace the hinges to save you money.
Window hinges may break after repeated use, or they may be weakened by corrosion over time. If you find a damaged hinge, it's important to take measures to prevent further damage by taking care not to make the window swing to close or open.
You can find the right parts for your hinge by identifying the type of hinge it is. Common types of window hinges are Maco, Mila, Roto and many other brands. Talk to a professional before buying parts that do not fit into your existing hardware. This could cause further damage.
The double glazed units near me hinges that are not working properly can be a huge issue for uPVC doors and windows. They can be an important source of noise double glazing units near me and can also allow water to infiltrate your windows.
To fix this issue, first make sure whether the pin barrel on both hinge halves is aligned. If not then tap the head pin using an hammer to create a shallow bend in the hinge barrel. This will help keep the pin in position. Have a person hold the doors while you take out hinge screws and hinges. Replace the hinges with ones that are the same size and then attach the screws using glue. Finally, while the glue is drying, fix the hinges using clamps or weights.
Once your hinges are repaired and repaired, you should be able to re-install the door and attach the handle. Replace the screws with wood dowels of the same size as the screw that was used to ensure they are in line.
Glass that is Broken or damaged
uPVC Windows can be damaged in time, despite the fact they are extremely effective in keeping cold out and keeping warmth. This could include damaged or broken glass and damaged locks. If left unattended, this can turn into a major expense. It can also affect the aesthetics of your home and lead to a loss in insulation. It is crucial to fix any damage as soon as it occurs.
If the glass is cracked but not shattered it is possible to fix it yourself with the proper tools and techniques. Make sure that the area around the broken glass is free of debris, so that shards do not cause injury or trip hazards. Then, take any pieces of broken glass and dispose of them properly. Apply masking tape to the entire area. This will prevent glass shards from sticking to your skin and splintering when you move them. If you're dealing with a double-paned window it's best to fit the glass pane before gluing it back into place so that you know you'll have enough room to complete the project.
Before applying the glue wipe the surface of the damaged frame and the glass with a dry, clean cloth. Follow the instructions for application and curing times which may differ from one product to the next. You may have to clamp the cracked glass with lightweight clamps designed to hold fragile materials, based on the angle.
Once the adhesive is fully cure, carefully install the glass inside the window frame, ensuring it's flush with the edges of the frame, and there are no gaps between the glass and the window sash. Avoid flexing the glass as you put it back in place, as this could weaken the seal. This could lead to water infiltration or condensation.
If you have a glass window that's completely shattered or has larger cracks, call a professional glazier like O'Brien(r) to organise an exchange. Unattended handling of broken glass can pose a safety risk for pet and children It's therefore essential to act fast.